Precision Solid-Liquid Separation
WG Precise Tubular Filter
For Fine Solids & Process Liquid Filtration
Porous tubular media capture fine suspended solids from process liquids. Select the filtration grade and system configuration around your liquid, impurities and required filtrate quality.
Tubular
Porous Filter Media
Fine Solids
Precision Filtration
Compact
Vessel-based Layout
Selected
By Liquid Properties
Key Benefits for Precision Filtration Projects
Match the medium and operating conditions before specifying a filter. A representative liquid sample helps establish the practical filtration duty.
Selectable Tubular Media
Choose a porous medium around the impurities to be retained and the required liquid quality.
Grouped Filter Elements
Multiple tubes provide filtration surface within a vessel-based arrangement.
Liquid Clarification
Review this stage where suspended solids affect the next process or reuse of the liquid.
Compatibility Review
Assess the liquid chemistry and temperature before selecting tubes, seals and contact parts.
Maintenance Planning
Provide access for inspection and media service as part of the equipment layout.
Performance Review
Use sample results to balance retention, flow and the practical service interval.
Applications in Industrial Liquid Treatment
Evaluate WG for suspended-solid removal in compatible liquids. Dissolved substances and sterilization duties require a different assessment.
Chemical Process Liquids
Review fine particulate impurities, viscosity and chemical compatibility.
Discuss ApplicationMining Process Water
Consider polishing duties where suspended solids limit downstream water use.
Discuss ApplicationTextile and Dye Liquids
Assess particulate removal without assuming dissolved color can be removed.
Discuss ApplicationFood and Pharmaceutical Liquids
Evaluate only with confirmed contact materials, cleaning needs and applicable standards.
Discuss ApplicationWorking Principle
A pressure difference moves liquid through porous tubular media. Suspended particles are retained while filtrate is collected. The feed path, service method and operating limits are confirmed with the final equipment configuration.
Request Technical ProposalLiquid Filtration Path
Retained solids remain at the medium. Cleaning and discharge arrangements depend on the supplied configuration.
Liquid Review
Identify flow, solids content, viscosity and chemical conditions.
Media Selection
Match the porous tube grade to the filtration objective.
Liquid Feeding
Deliver the liquid to the filter at the agreed operating condition.
Particle Retention
Retain suspended impurities at the selected medium.
Filtrate Collection
Collect the filtered liquid for its next process duty.
Media Service
Inspect and clean or replace elements according to the agreed procedure.
Main Structure and Components
Review the following functional groups when defining the supply scope. Vessel details, piping and instruments are confirmed in the project drawing.
Filter Vessel
Houses the filter elements and provides the required liquid connections.
Porous PE Tubes
Provide the particulate filtration medium selected for the liquid.
Element Support
Positions and supports the tube assembly inside the vessel.
Feed and Filtrate Lines
Connect the filter to upstream and downstream liquid handling.
Pressure Measurement
Allow operators to review the condition across the filtration stage.
Service Access
Provide access for inspection and agreed element maintenance.
Technical Specifications
WG sizing depends on the liquid duty. The table identifies the information needed for a project-specific equipment specification.
| Parameter | Selection Basis | Information to Provide |
|---|---|---|
| Flow rate | Sized against available filtration surface and liquid behavior | Normal and peak flow, operating hours |
| Filtration grade | Selected according to the required retention duty | Particle distribution and filtrate target |
| Contact materials | Matched to the liquid and service temperature | Composition, pH and temperature |
| Operating conditions | Confirmed for the selected vessel and system | Feed pressure and downstream requirements |
| Cleaning and service | Specified according to solids loading and fouling behavior | Service access and available cleaning utilities |
No single throughput or retention value applies to every liquid. Request the selected model sheet and confirm the filtration grade using representative material.
Material and Configuration Options
Agree the equipment configuration around the material, operating conditions and project interfaces.
Media Grade
Specify the solids to remove and the fraction that may pass to the next stage.
Contact Materials
Review PE tubes, seals and vessel materials against the liquid chemistry.
Liquid Connections
Confirm the feed pump, inlet and outlet connections, and isolation arrangement.
Operating Interface
Agree the measurement points, alarms and control scope for the process line.
Why Customers Trust Hexin
Quality Control from Raw Materials to Factory Testing
A precise liquid filter depends on media condition, element fit, sealing and liquid containment. Define these checks when the equipment scope is agreed.
Media and Element Review
Confirm the specified medium, element quantity and installation arrangement.
Assembly and Seal Checks
Review support fit, joints and the applicable leak-check procedure.
Operating Documentation
Confirm connection drawings and the agreed service instructions.
Technical Confirmation
Review the feed liquid, filtration duty and scope before manufacture.
Media Inspection
Check element condition and consistency against the selected specification.
Vessel Assembly
Check contact parts, support assembly and seal installation.
Factory Verification
Complete applicable checks and agree records before dispatch.
Project-based Filtration Solutions
Select the filtration stage by the liquid-quality objective. Compare these project routes with Hexin before defining the equipment scope.
Chemical Liquid Filtration
Discuss particulate impurities, liquid compatibility and downstream process requirements.
Learn MoreIndustrial Water Treatment
Review whether a polishing stage is needed after upstream solids removal.
Learn MoreProject-specific Filtration
Share the liquid sample and acceptance criterion to compare suitable filtration technologies.
Learn More
Delivery, Service and Export Packing
Agree manufacturing, shipment and commissioning responsibilities as part of the technical proposal and supply contract.
Manufacturing Schedule
After technical proposal and supply scope confirmation, Hexin prepares a project-specific production schedule based on equipment size, materials, purchased components, and automation requirements.
Commissioning Support
Support can cover installation review, no-load testing, process checks, equipment adjustment, performance observation, and operator training according to project scope.
Export Packing
Large equipment can be fixed with steel structure packing, while small components and electrical parts can use wooden cases with moisture and rust protection.
Need a Precise Tubular Filter for Your Liquid?
Send the liquid composition, flow, particle distribution and filtrate target. Hexin can review a suitable tubular filter specification and supply scope.
What to Include in Your Inquiry
Feed Liquid
Liquid name, suspended solids, viscosity, pH, temperature and corrosion concerns.
Required Filtration
Normal and peak flow, retention objective and the next use of the filtrate.
Installation and Service
Available pressure, utilities, service access and project country.
Related Products and Solutions
Horizontal Vacuum Filter
Continuous vacuum filtration and cake washing.
Learn MoreDF Ceramic Filter
Ceramic filtration for suitable fine slurry.
Learn MoreTFP Vertical Automatic Pressure Filter
Automatic pressure filtration and cake discharge.
Learn MoreNGZ High Efficiency Thickener
Slurry concentration and overflow recovery.
Learn More